XLPE-insulated medium-voltage cables for transformer substations and fixed power-distribution connections. Conductor, cross-section, screen, armour and outer-sheath construction are selected according to installation conditions.
XLPE medium-voltage cables are used for fixed distribution connections between switchgear, transformers and network equipment.
Copper or aluminium conductors, single-core or three-core constructions, metallic screens, armour and outer sheath options are selected according to current-carrying requirement and installation environment.
Ampacity, cross-section and exact cable code must be confirmed by project-specific calculation and the approved manufacturer datasheet.
| Voltage Examples | 6/10 and 8.7/15 kV |
| Other Classes | 12/20 and 18/30 kV |
| Maximum System Voltage Um | Up to 36 kV |
| Insulation | XLPE |
| Conductor | Copper / aluminium |
| Core Construction | Single-core / three-core |
| Reference | IEC 60502-2 |
Technical drawings and project documents are prepared according to the selected configuration and project requirements. You can request the following documents during the quotation process.
Provide system voltage, conductor material, required cross-section or load current, route length, installation method, screen/armour requirement and quantity.
View All Products Contact Our Technical Team
It should be checked for current-carrying capacity, voltage drop, short-circuit thermal withstand and installation conditions.
Yes, depending on the selected cable family and project specification.
It refers to the maximum system voltage associated with the cable voltage class; the exact cable designation must match the project system.